Replace Faulty Nodes POWEREDGE-XE-OPERATE Practice Questions (Page 4)

Questions 16–20

1. 16foundation · easy

   Which tool is specifically designed to help isolate a faulty node in a PowerEdge XE chassis by providing detailed hardware status and logs?

   • ADell OpenManage Power Center
   • BDell Integrated Dell Remote Access Controller (iDRAC)
   • CDell SupportAssist
   • DDell OpenManage Server Administrator (OMSA)
   Reveal Solution Discussion Select an answer first
2. 17foundation · easy

   What is the key step when installing a replacement node into a PowerEdge XE chassis?

   • AInsert the node at an angle to avoid resistance
   • BPush the node in with force to ensure a tight fit
   • CLeave the node slightly out to allow for easy removal later
   • DSlide the node in until it clicks into place, ensuring it is fully seated
   Reveal Solution Discussion Select an answer first
4. 18application · medium

   A technician is removing a faulty node from a PowerEdge XE chassis. The node has been powered down and all cables have been disconnected. The technician releases the locking latch but the node does not slide out easily. The technician needs to remove the node without causing damage.

   • AGently rock the node back and forth while pulling on the handle to free it from the midplane connector.
   • BPull the node out with significant force, as the latch release should have fully disengaged the node.
   • CReinsert the node slightly and then pull it out again, as this will help align the midplane connector.
   • DUse a flathead screwdriver to pry the node out from the front, applying force at the edges.
   Reveal Solution Discussion Select an answer first
5. 19application · medium

   A data center technician notices that one node in a PowerEdge XE chassis is generating a flood of corrected memory errors in the system event log, while all other nodes show healthy status. The node's front-panel LED is blinking amber, but the workload on that node is still running without visible performance issues. The technician needs to determine the appropriate next step before considering a replacement.

   • AImmediately power down the node and replace it, since any memory errors indicate a hardware failure requiring replacement.
   • BContinue monitoring the node for 30 days to see if the errors resolve on their own before taking any action.
   • CCheck the error logs for the error threshold and severity, then run a memory diagnostic to determine if the errors are escalating or if the node is still within acceptable limits.
   • DReplace the node's memory modules one at a time while the node remains powered on to identify the faulty DIMM.
   Reveal Solution Discussion Select an answer first
6. 20foundation · easy

   What is the correct way to physically remove a faulty node from a PowerEdge XE chassis?

   • ATilt the node upward and pull it out quickly
   • BPull the node straight out using the release latch, supporting it from underneath
   • CPull the node out by the front bezel
   • DUse a screwdriver to pry the node out of the chassis
   Reveal Solution Discussion Select an answer first