A log entry shows a 'fan speed sensor' warning with a value below the minimum threshold. What is the most appropriate action based on this log?

Check the physical fan and its connection

Ignore the warning if the server is running

A technician is investigating intermittent performance issues on a PowerEdge XE server. The iDRAC SEL shows the following entries over a 30-minute period: 10:00:00 INFO: Fan speed increased 10:00:05 INFO: Fan speed decreased 10:10:00 INFO: Fan speed increased 10:10:05 INFO: Fan speed decreased 10:20:00 INFO: Fan speed increased 10:20:05 INFO: Fan speed decreased No temperature warnings are present. What is the most likely cause of this pattern?

The temperature sensors are faulty

The server is under variable load

A technician needs to determine if a PowerEdge XE server was rebooted due to a kernel panic or a hardware fault. Which log file should be examined FIRST to make this determination?

The iDRAC System Event Log (SEL)

Both the OS system log and the iDRAC SEL

The OS system log (e.g., /var/log/messages)

The Lifecycle Controller log only

Where can a technician typically access the System Event Log (SEL) on a Dell PowerEdge XE server?

On the server's front LCD panel

In the operating system's /var/log directory

Through the iDRAC web interface

A technician is reviewing the Lifecycle Controller logs and finds the following entry: [2025-03-14 09:15:00] CRITICAL: Temperature sensor 'Inlet Temp' exceeded threshold (42 C) The server is currently running normally. What is the most appropriate action for the technician to take?

Ignore the entry since the server is running normally

Investigate the cooling system and ambient conditions

Immediately shut down the server to prevent damage

Dell PowerEdge XE Operate

Domain 5Objective 2

Interpret Log File Output POWEREDGE-XE-OPERATE Practice Questions (Page 2)

Part of the Troubleshooting domain, which accounts for 26% of the POWEREDGE-XE-OPERATE exam.

25questions here

5free pages

5concepts

26%of the exam

Questions 6–10

6foundation · easy
A log entry shows a 'fan speed sensor' warning with a value below the minimum threshold. What is the most appropriate action based on this log?
Select an answer first
7expert · hard
A technician is investigating intermittent performance issues on a PowerEdge XE server. The iDRAC SEL shows the following entries over a 30-minute period: 10:00:00 INFO: Fan speed increased 10:00:05 INFO: Fan speed decreased 10:10:00 INFO: Fan speed increased 10:10:05 INFO: Fan speed decreased 10:20:00 INFO: Fan speed increased 10:20:05 INFO: Fan speed decreased No temperature warnings are present. What is the most likely cause of this pattern?
Select an answer first
8application · medium
A technician needs to determine if a PowerEdge XE server was rebooted due to a kernel panic or a hardware fault. Which log file should be examined FIRST to make this determination?
Select an answer first
9foundation · easy
Where can a technician typically access the System Event Log (SEL) on a Dell PowerEdge XE server?
Select an answer first
10application · medium
A technician is reviewing the Lifecycle Controller logs and finds the following entry: [2025-03-14 09:15:00] CRITICAL: Temperature sensor 'Inlet Temp' exceeded threshold (42 C) The server is currently running normally. What is the most appropriate action for the technician to take?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-XE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-XE-OPERATE” is a trademark of its owner, used for identification only.