You have configured RADIUS authentication on a Dell PowerEdge XE switch. To verify that the configuration is correct, you check the running configuration and see the RADIUS server IP and shared secret. What additional verification should you perform?

Check that the RADIUS server is configured with the same shared secret.

Test authentication by logging in with a RADIUS user account.

Verify that the RADIUS server is reachable via ping.

Confirm that the switch's time is synchronized with NTP.

After configuring RADIUS authentication on a Dell PowerEdge XE switch, which action best verifies that the implementation is working correctly?

Attempt to log in using a RADIUS-authenticated user account and confirm access is granted.

Review the running configuration to confirm the RADIUS server is listed.

Ping the RADIUS server from the switch.

Reboot the switch and check if the configuration persists.

You are troubleshooting authentication on a Dell PowerEdge XE switch. The switch is configured to use RADIUS for authentication, but users are unable to log in. You have verified that the RADIUS server is reachable and the shared secret is correct. What should you check next?

Verify that the authentication method list is applied to the correct lines (console, VTY).

Check if the RADIUS server is configured to accept requests from the switch's IP address.

Confirm that the switch's clock is synchronized with NTP.

Ensure that the switch's management interface has a route to the RADIUS server.

Dell PowerEdge XE Operate

Domain 6Objective 1

Implement Authentication at the Switch Level Based on Customer Policies POWEREDGE-XE-OPERATE Practice Questions (Page 3)

Part of the Security domain, which accounts for 5% of the POWEREDGE-XE-OPERATE exam.

14questions here

3free pages

4concepts

5%of the exam

Questions 11–14

11application · medium
You have configured RADIUS authentication on a Dell PowerEdge XE switch. To verify that the configuration is correct, you check the running configuration and see the RADIUS server IP and shared secret. What additional verification should you perform?
Select an answer first
12foundation · easy
After configuring RADIUS authentication on a Dell PowerEdge XE switch, which action best verifies that the implementation is working correctly?
Select an answer first
13expert · hard
You are troubleshooting authentication on a Dell PowerEdge XE switch. The switch is configured to use RADIUS for authentication, but users are unable to log in. You have verified that the RADIUS server is reachable and the shared secret is correct. What should you check next?
Select an answer first
14foundation · easy
Which command is used to display the current authentication configuration on a Dell PowerEdge XE switch, including the method lists and server settings?
Select an answer first

Finished these 4 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to POWEREDGE-XE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-XE-OPERATE” is a trademark of its owner, used for identification only.

Implement Authentication at the Switch Level Based on Customer Policies POWEREDGE-XE-OPERATE Practice Questions (Page 3)

Questions 11–14

You have configured RADIUS authentication on a Dell PowerEdge XE switch. To verify that the configuration is correct, you check the running configuration and see the RADIUS server IP and shared secret. What additional verification should you perform?

After configuring RADIUS authentication on a Dell PowerEdge XE switch, which action best verifies that the implementation is working correctly?

You are troubleshooting authentication on a Dell PowerEdge XE switch. The switch is configured to use RADIUS for authentication, but users are unable to log in. You have verified that the RADIUS server is reachable and the shared secret is correct. What should you check next?

Which command is used to display the current authentication configuration on a Dell PowerEdge XE switch, including the method lists and server settings?

Keep studying — Security