Connect New Nodes to the Cluster POWEREDGE-XE-OPERATE Practice Questions (Page 4)

Questions 16–20

1. 16application · medium

   A company is adding two PowerEdge XE nodes to an existing cluster. The new nodes have the same hardware model as the current nodes but are running an older firmware version. The cluster management software requires a minimum firmware version for all nodes. What should the administrator do before attempting to connect the new nodes?

   • AConfigure the network settings on the new nodes first, then connect them to the cluster.
   • BConnect the nodes and let the cluster management software automatically update the firmware during the addition process.
   • CUpdate the firmware on the new nodes to the minimum required version before connecting them.
   • DAdd the nodes to the cluster and then run health checks to see if the firmware version causes any issues.
   Reveal Solution Discussion Select an answer first
2. 17foundation · easy

   What is the purpose of configuring VLANs on a new node's network interfaces in a cluster?

   • ATo replace the need for IP addressing
   • BTo allow the node to connect to the internet
   • CTo segment different types of cluster traffic for security and performance
   • DTo increase the node's CPU performance
   Reveal Solution Discussion Select an answer first
4. 18application · medium

   During the discovery process for a new PowerEdge XE node, the cluster management software reports that the node's firmware is not compatible. The administrator has verified that the node is connected to the network and has a valid IP address. What should the administrator do to resolve this issue?

   • ARestart the cluster management software.
   • BChange the node's IP address to a different subnet.
   • CAssign the node a temporary role to bypass the check.
   • DUpdate the node's firmware to a version that is compatible with the cluster.
   Reveal Solution Discussion Select an answer first
5. 19application · medium

   A new PowerEdge XE node has been added to the cluster and assigned the compute role. The administrator wants to confirm that the node is fully operational and integrated. Which action should the administrator take?

   • AReview the node's firmware version.
   • BReboot the node to ensure it starts cleanly.
   • CRun cluster health checks and verify the node's status shows as healthy.
   • DCheck the node's IP address configuration.
   Reveal Solution Discussion Select an answer first
6. 20application · medium

   A cluster administrator is adding a new PowerEdge XE node that will serve as a compute node. The cluster uses a dedicated VLAN for cluster communication and a separate VLAN for management traffic. The administrator has configured the node's IP address for the management VLAN. What else must be configured to ensure the node can participate in cluster communication?

   • AConfigure the node's cluster communication interface with an IP address on the cluster VLAN.
   • BEnsure the node's firmware is up to date.
   • CAssign the node a role of compute in the cluster management software.
   • DVerify that the node's storage is zoned correctly.
   Reveal Solution Discussion Select an answer first