After adding a new node to a Dell PowerEdge XE cluster, an administrator wants to verify that the node is correctly provisioned and communicating with the cluster. Which action should the administrator take to confirm the node's status?

Check the node's status in the cluster management interface, which should show 'Online' or 'Healthy'.

Verify that the node's power LED is solid green.

Review the node's local event logs for any errors.

Ping the node's IP address from a workstation on the same network.

An administrator has added a new node to a Dell PowerEdge XE cluster. The node appears as 'Healthy' in the management interface, but the administrator cannot access the node's iDRAC interface from the management workstation. The node's iDRAC is configured with an IP address on the management VLAN. What is the most likely cause of this issue?

The iDRAC firmware is outdated.

The node's iDRAC is not configured with a valid IP address.

The management workstation is not on the same VLAN as the iDRAC.

An administrator is provisioning a node in a Dell PowerEdge XE cluster. The node has been discovered, but the administrator is unsure whether the node's network configuration is correct. The cluster uses a dedicated management VLAN (VLAN 10) and a data VLAN (VLAN 20). The node's management interface is currently configured with an IP address in the data VLAN subnet. What is the most likely result?

The node will appear as 'Healthy' but will not be able to access shared storage.

The node will communicate normally, but performance will be degraded.

The node will be automatically moved to the correct VLAN by the cluster.

The node will not be able to communicate with the cluster management interface.

An administrator is creating a new cluster in the Dell PowerEdge XE management interface. They have already verified that all nodes are running compatible firmware and have the correct network settings. During the cluster creation wizard, they are asked to select the nodes to include. What should the administrator do to ensure the cluster is created with the correct nodes?

Select all nodes that are intended for the cluster and verify their IP addresses are correct.

Select the nodes in the order they were physically installed in the rack.

Select only the nodes that have the same firmware version.

Select the nodes that have the highest CPU core count.

An administrator is provisioning a node in a Dell PowerEdge XE cluster. The node has been discovered and the administrator is configuring its storage. The cluster uses a shared storage array that is accessed via iSCSI. What should the administrator configure on the node?

The node's Fibre Channel HBA settings.

The node's NFS client settings.

The node's local RAID controller settings.

The iSCSI initiator settings, including the target IP address and CHAP credentials.

Dell PowerEdge XE Operate

Domain 1Objective 1

Add a Cluster and Provision Nodes POWEREDGE-XE-OPERATE Practice Questions (Page 5)

Part of the Scaling Solutions domain, which accounts for 19% of the POWEREDGE-XE-OPERATE exam.

28questions here

6free pages

6concepts

19%of the exam

Questions 21–25

21application · medium
After adding a new node to a Dell PowerEdge XE cluster, an administrator wants to verify that the node is correctly provisioned and communicating with the cluster. Which action should the administrator take to confirm the node's status?
Select an answer first
22expert · hard
An administrator has added a new node to a Dell PowerEdge XE cluster. The node appears as 'Healthy' in the management interface, but the administrator cannot access the node's iDRAC interface from the management workstation. The node's iDRAC is configured with an IP address on the management VLAN. What is the most likely cause of this issue?
Select an answer first
23expert · hard
An administrator is provisioning a node in a Dell PowerEdge XE cluster. The node has been discovered, but the administrator is unsure whether the node's network configuration is correct. The cluster uses a dedicated management VLAN (VLAN 10) and a data VLAN (VLAN 20). The node's management interface is currently configured with an IP address in the data VLAN subnet. What is the most likely result?
Select an answer first
24application · medium
An administrator is creating a new cluster in the Dell PowerEdge XE management interface. They have already verified that all nodes are running compatible firmware and have the correct network settings. During the cluster creation wizard, they are asked to select the nodes to include. What should the administrator do to ensure the cluster is created with the correct nodes?
Select an answer first
25application · medium
An administrator is provisioning a node in a Dell PowerEdge XE cluster. The node has been discovered and the administrator is configuring its storage. The cluster uses a shared storage array that is accessed via iSCSI. What should the administrator configure on the node?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-XE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-XE-OPERATE” is a trademark of its owner, used for identification only.

Add a Cluster and Provision Nodes POWEREDGE-XE-OPERATE Practice Questions (Page 5)

Questions 21–25

After adding a new node to a Dell PowerEdge XE cluster, an administrator wants to verify that the node is correctly provisioned and communicating with the cluster. Which action should the administrator take to confirm the node's status?

An administrator is provisioning a node in a Dell PowerEdge XE cluster. The node has been discovered and the administrator is configuring its storage. The cluster uses a shared storage array that is accessed via iSCSI. What should the administrator configure on the node?

Keep studying — Scaling Solutions