A university is replacing its campus network. The project team has completed the assessment and design phases. They are now ready to begin the migration. What should be the first step in the migration phase?

Develop a rollback plan in case the migration fails.

Install and configure the new network equipment in a lab environment for testing.

Validate the new network by running performance tests on the old network.

Decommission the old network equipment to free up rack space.

A data center is deploying FCoE. The network team has configured the FCoE VLANs and enabled PFC. However, the storage array is not visible to the servers. What is the most likely cause?

FIP is not enabled on the FCoE switches.

The servers are using standard NICs instead of CNAs.

The FCoE VLAN is not tagged on the storage array.

The storage array is not connected to the FCoE switch.

A company is considering FCoE to consolidate its storage and LAN networks. The storage team is concerned about the performance of storage traffic on a shared Ethernet network. Which feature of FCoE helps address this concern?

Priority-based flow control (PFC)

Which component in an FCoE environment is responsible for connecting a server to an FCoE switch and performing the encapsulation of Fibre Channel frames?

FCoE Initialization Protocol (FIP) switch

Converged Network Adapter (CNA)

A hospital is replacing its network to support new telemedicine services. The new network must be highly available and meet strict patient data privacy regulations. The project team is considering a phased migration to minimize disruption. Which factor is most critical to the success of the migration?

Completing the migration as quickly as possible to reduce costs.

Using the same network vendor as the old network.

Ensuring that patient data remains protected and accessible during the migration.

Migrating all services in a single weekend to avoid disruption.

Dell Networking Design

Domain 3Objective 4

Network and Storage Planning NETWORKING-DESIGN Practice Questions (Page 4)

Part of the Planning domain, which accounts for 51% of the NETWORKING-DESIGN exam.

21questions here

5free pages

4concepts

51%of the exam

Questions 16–20

16application · medium
A university is replacing its campus network. The project team has completed the assessment and design phases. They are now ready to begin the migration. What should be the first step in the migration phase?
Select an answer first
17expert · hard
A data center is deploying FCoE. The network team has configured the FCoE VLANs and enabled PFC. However, the storage array is not visible to the servers. What is the most likely cause?
Select an answer first
18application · medium
A company is considering FCoE to consolidate its storage and LAN networks. The storage team is concerned about the performance of storage traffic on a shared Ethernet network. Which feature of FCoE helps address this concern?
Select an answer first
19foundation · easy
Which component in an FCoE environment is responsible for connecting a server to an FCoE switch and performing the encapsulation of Fibre Channel frames?
Select an answer first
20expert · hard
A hospital is replacing its network to support new telemedicine services. The new network must be highly available and meet strict patient data privacy regulations. The project team is considering a phased migration to minimize disruption. Which factor is most critical to the success of the migration?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to NETWORKING-DESIGN

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “NETWORKING-DESIGN” is a trademark of its owner, used for identification only.