After expanding a volume on Dell Metro Node, what is the first step to verify the new capacity is visible to the host?

Recreate the volume on the Metro Node.

Rescan the storage devices on the host.

After expanding a virtual volume from 1 TB to 2 TB using Unisphere, a Windows administrator reports that the host still shows the original 1 TB capacity. The volume is online and the host uses a supported multipathing driver. What is the most likely reason the host does not see the new capacity?

The volume expansion failed because the storage pool ran out of space.

The host needs to be rebooted to rescan the storage.

The host's filesystem has not been extended to use the new space.

The volume is not part of a distributed device, so expansion is not supported.

When expanding a volume using Unisphere, what must the administrator specify to complete the expansion?

The name of the new storage pool to use.

The new WWN (World Wide Name) for the volume.

The new total size for the volume.

In Unisphere for Dell Metro Node, which sequence correctly describes the steps to expand a volume?

Delete the volume, recreate it with a larger size, and re-export it to hosts.

Create a new storage pool, then use the Migrate option to move the volume to the new pool.

Use the Storage Pools tab to increase the pool size, then the volume automatically expands.

Select the volume, choose Expand, enter the new size, and confirm the operation.

An administrator is using VPlexcli to expand a volume. The volume is currently 2 TB and needs to be expanded to 2.5 TB. The administrator runs the command 'volume expand --volume vol_data --size 2.5T'. After the command, the administrator wants to verify the expansion on the storage side. Which command should be used?

volume expand --volume vol_data --size 2.5T --verify

Dell Metro Node Operate

Domain 3Objective 4

List and Explain the Process to Perform Volume Expansion Using Unisphere and VPlexcli METRO-NODE-OPERATE Practice Questions (Page 2)

Part of the Distributed Devices domain, which accounts for 20% of the METRO-NODE-OPERATE exam.

18questions here

4free pages

4concepts

20%of the exam

Questions 6–10

6foundation · easy
After expanding a volume on Dell Metro Node, what is the first step to verify the new capacity is visible to the host?
Select an answer first
7application · medium
After expanding a virtual volume from 1 TB to 2 TB using Unisphere, a Windows administrator reports that the host still shows the original 1 TB capacity. The volume is online and the host uses a supported multipathing driver. What is the most likely reason the host does not see the new capacity?
Select an answer first
8foundation · easy
When expanding a volume using Unisphere, what must the administrator specify to complete the expansion?
Select an answer first
9foundation · easy
In Unisphere for Dell Metro Node, which sequence correctly describes the steps to expand a volume?
Select an answer first
10application · medium
An administrator is using VPlexcli to expand a volume. The volume is currently 2 TB and needs to be expanded to 2.5 TB. The administrator runs the command 'volume expand --volume vol_data --size 2.5T'. After the command, the administrator wants to verify the expansion on the storage side. Which command should be used?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to METRO-NODE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “METRO-NODE-OPERATE” is a trademark of its owner, used for identification only.