A storage administrator is provisioning a volume for a new application server. The server's WWN is not yet registered in Unisphere. What should the administrator do to ensure the server can access the volume?

Skip the masking view and rely on the server's OS to discover the volume.

Create the volume and then manually add the server's WWN to the volume's properties.

Create the masking view using the server's IP address.

Register the server's WWN in Unisphere, then create the masking view.

Which step in the EZ provisioning workflow is performed AFTER volumes are configured but BEFORE the operation is executed?

Select the storage pool or tier

Define host mappings and masking views

Start the EZ provisioning wizard

Verify the created volumes in Unisphere

An administrator has completed the EZ provisioning wizard and executed the operation. Which action should the administrator take to confirm that the volume was created and is accessible to the intended host?

Check the Storage view to see the new volume and the Masking view to confirm the host mapping.

Check the system event log for any warnings, but no further verification is needed.

Reboot the host and check if the volume appears in the OS.

Run the wizard again to see if the volume is listed as an existing resource.

After executing the EZ provisioning operation, what should an administrator do to confirm the volumes were created correctly?

Re-run the EZ provisioning wizard

Check the host's operating system for new disks

Check the Volumes list in Unisphere for the new volumes

A new storage administrator is learning to use Unisphere and needs to provision a test volume. The administrator wants to use the EZ provisioning wizard but is unsure where to find it. Which action should the administrator take?

Click on the 'Settings' menu and select 'Wizards'.

Click on the 'Hosts' menu and select 'Add Host'.

Click on the 'Storage' menu and select 'EZ Provisioning'.

Click on the 'Monitoring' menu and select 'Alerts'.

Dell Metro Node Operate

Domain 2Objective 4

List and Describe the Steps for EZ Provisioning Operations Using Unisphere METRO-NODE-OPERATE Practice Questions (Page 1)

Part of the Provision Storage domain, which accounts for 20% of the METRO-NODE-OPERATE exam.

22questions here

5free pages

6concepts

20%of the exam

Questions 1–5

1application · medium
A storage administrator is provisioning a volume for a new application server. The server's WWN is not yet registered in Unisphere. What should the administrator do to ensure the server can access the volume?
Select an answer first
2foundation · easy
Which step in the EZ provisioning workflow is performed AFTER volumes are configured but BEFORE the operation is executed?
Select an answer first
3application · medium
An administrator has completed the EZ provisioning wizard and executed the operation. Which action should the administrator take to confirm that the volume was created and is accessible to the intended host?
Select an answer first
4foundation · easy
After executing the EZ provisioning operation, what should an administrator do to confirm the volumes were created correctly?
Select an answer first
5application · easy
A new storage administrator is learning to use Unisphere and needs to provision a test volume. The administrator wants to use the EZ provisioning wizard but is unsure where to find it. Which action should the administrator take?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to METRO-NODE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “METRO-NODE-OPERATE” is a trademark of its owner, used for identification only.