A Metro node system is being deployed in a data center. The management network uses a dedicated VLAN with a subnet of 192.168.10.0/24. The management IP addresses for the nodes are 192.168.10.10 and 192.168.10.11. An administrator wants to access the GUI from a workstation on the same subnet. What is required for the GUI to be accessible?

The workstation must use HTTPS with a valid certificate

The management IP address must be reachable via a gateway

The GUI must be enabled on the management IP address

The workstation must have a route to the management subnet

A Metro node system has two management IP addresses, one for each node. An administrator wants to access the GUI from a workstation that is on a different subnet. The administrator can ping both management IPs. However, the GUI does not load. What is the most likely cause?

The administrator is using the wrong protocol (HTTP instead of HTTPS)

The administrator's role does not have GUI access

The GUI service is not running on the management IP

The workstation is not on the same subnet

What is the purpose of role-based access control (RBAC) in a Metro node system?

To monitor network traffic for security threats

To restrict user permissions based on their role in the organization

To allow all users to have full administrative access

To encrypt data at rest on the storage system

Dell Metro Node Operate

Domain 7Objective 2

Describe the Management Options for a Metro Node System METRO-NODE-OPERATE Practice Questions (Page 4)

Part of the Metro Node Features domain, which accounts for 10% of the METRO-NODE-OPERATE exam.

29questions here

6free pages

8concepts

10%of the exam

Questions 16–20

16application · medium
A Metro node system is being deployed in a data center. The management network uses a dedicated VLAN with a subnet of 192.168.10.0/24. The management IP addresses for the nodes are 192.168.10.10 and 192.168.10.11. An administrator wants to access the GUI from a workstation on the same subnet. What is required for the GUI to be accessible?
Select an answer first
17expert · hard
A Metro node system has two management IP addresses, one for each node. An administrator wants to access the GUI from a workstation that is on a different subnet. The administrator can ping both management IPs. However, the GUI does not load. What is the most likely cause?
Select an answer first
18foundation · easy
What is the purpose of role-based access control (RBAC) in a Metro node system?
Select an answer first
19foundation · easy
Which management interface allows programmatic automation of a Metro node system?
Select an answer first
20application · medium
A company has a policy that only the storage team can modify Metro node configurations. A new employee in the storage team needs to be able to create volumes and manage snapshots, but should not be able to change system-level settings like IP addresses or firmware. Which role should be assigned?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to METRO-NODE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “METRO-NODE-OPERATE” is a trademark of its owner, used for identification only.

Describe the Management Options for a Metro Node System METRO-NODE-OPERATE Practice Questions (Page 4)

Questions 16–20

A Metro node system has two management IP addresses, one for each node. An administrator wants to access the GUI from a workstation that is on a different subnet. The administrator can ping both management IPs. However, the GUI does not load. What is the most likely cause?

What is the purpose of role-based access control (RBAC) in a Metro node system?

Which management interface allows programmatic automation of a Metro node system?

A company has a policy that only the storage team can modify Metro node configurations. A new employee in the storage team needs to be able to create volumes and manage snapshots, but should not be able to change system-level settings like IP addresses or firmware. Which role should be assigned?

Keep studying — Metro Node Features