Explain Avamar Installation Procedures, Best Practices, and Understand Licensing Options AVAMAR-DEPLOY Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   When planning an Avamar installation, which network configuration is a recommended best practice?

   • AUse a single network interface for both client traffic and replication
   • BPlace the Avamar server on a public IP address for easier access
   • CDedicate separate network interfaces for client backup traffic and replication traffic
   • DUse a single VLAN for all backup, management, and replication traffic
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   An administrator is installing Avamar and needs to ensure that the system time is synchronized across all components. What is the best practice for time synchronization?

   • AUse a local NTP server and configure all Avamar components to use it.
   • BManually set the time on each component to the same value.
   • CDisable time synchronization to avoid conflicts.
   • DUse the hypervisor's time synchronization for virtual Avamar servers.
   Reveal Solution Discussion Select an answer first
4. 8application · easy

   During the Avamar installation, the installer prompts for the type of installation. The administrator needs to install a single-node Avamar server that will be used as a backup target for a small office. Which installation type should they select?

   • AClient installation to back up local workstations.
   • BGrid installation with multiple nodes to provide high availability.
   • CReplication installation to copy data to a remote site.
   • DSingle-node installation.
   Reveal Solution Discussion Select an answer first
5. 9application · medium

   A company is deploying a new Avamar server in a data center that already hosts other backup appliances. The network team has allocated a single 10 GbE port for the Avamar server and insists on using the same subnet as the management network for both backup traffic and replication traffic. The Avamar administrator wants to follow best practices. What should the administrator recommend?

   • AUse the single port but configure Quality of Service (QoS) to prioritize backup traffic over management and replication traffic.
   • BRequest separate network interfaces for management, client backup, and replication traffic, each on its own subnet and physical port.
   • CRequest a second 10 GbE port and dedicate one port for client backup traffic and the other for replication and management traffic.
   • DUse the single 10 GbE port for all traffic and rely on VLAN tagging to separate management, backup, and replication traffic.
   Reveal Solution Discussion Select an answer first
6. 10application · medium

   An administrator is installing Avamar on a new server. During the pre-installation checklist, they verify that the server meets the hardware requirements and that the operating system is at the correct version. What other critical pre-installation step should they perform?

   • ACreate a local user account with administrative privileges for the installer to use.
   • BDisable the firewall and all security policies on the server.
   • CConfigure the network interfaces with static IP addresses and hostnames before running the installer.
   • DInstall the latest antivirus software and run a full system scan.
   Reveal Solution Discussion Select an answer first