An administrator is deploying the Falcon sensor to a group of Linux servers running RHEL 8. The servers have Secure Boot enabled. The sensor installation completes, but the sensor fails to start. The administrator suspects a kernel module signing issue. What should the administrator verify?

That the sensor was installed using the RPM package

That the servers can reach the Falcon cloud on port 443

That the kernel module is signed with a key trusted by the system's UEFI Secure Boot

That the servers have at least 4 GB of RAM

A company is deploying the Falcon sensor to Windows 10 devices that have BitLocker enabled and are using UEFI with Secure Boot. The administrator is concerned about compatibility. What should the administrator do?

Disable Secure Boot on all devices before installation

Verify that the sensor supports Secure Boot and BitLocker on the target Windows version

Install the sensor using the command line instead of the GUI

Disable BitLocker on all devices before installation

Which type of software may conflict with the Falcon sensor on a Windows system and need to be addressed before installation?

Endpoint detection and response (EDR) tools

A Linux administrator is installing the Falcon sensor on a CentOS 7 server. The installation fails because the sensor cannot load its kernel module. The administrator checks dmesg and sees that the module is being rejected. What is the most likely cause?

The kernel headers or development packages required to build the module are missing

The server is not connected to the internet

The server has less than 2 GB of RAM

The server is running a 32-bit kernel

CrowdStrikeCertified Falcon Administrator (CCFA)

Domain 2Objective 1

2.1 Determine Prerequisites to Successfully Install a Falcon Sensor on Supported Operating Systems CCFA Practice Questions (Page 3)

Part of the Sensor Deployment domain, which makes up ~19% of our current practice bank.

32questions here

7free pages

8concepts

Questions 11–15

11application · medium
An administrator is deploying the Falcon sensor to a group of Linux servers running RHEL 8. The servers have Secure Boot enabled. The sensor installation completes, but the sensor fails to start. The administrator suspects a kernel module signing issue. What should the administrator verify?
Select an answer first
12application · medium
A company is deploying the Falcon sensor to Windows 10 devices that have BitLocker enabled and are using UEFI with Secure Boot. The administrator is concerned about compatibility. What should the administrator do?
Select an answer first
13foundation · easy
Which type of software may conflict with the Falcon sensor on a Windows system and need to be addressed before installation?
Select an answer first
14foundation · easy
Which type of software may conflict with the Falcon sensor and need to be addressed before installation?
Select an answer first
15application · medium
A Linux administrator is installing the Falcon sensor on a CentOS 7 server. The installation fails because the sensor cannot load its kernel module. The administrator checks dmesg and sees that the module is being rejected. What is the most likely cause?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CCFA

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by CrowdStrike. “CCFA” is a trademark of its owner, used for identification only.