A campus is installing network equipment in a room that will also be used as a storage area for cleaning supplies. The room has limited airflow and no dedicated cooling. The network team is concerned about the equipment overheating and potential damage from fumes. What should the team do?

Seal the network equipment in a waterproof enclosure.

Relocate the cleaning supplies to a different area and install a dedicated cooling unit for the network equipment.

Use industrial-grade switches that are rated for harsh environments.

Install a ventilation fan to bring in outside air.

A campus is installing a new network operations center (NOC) in a building that also houses a public cafeteria. The NOC will contain sensitive equipment and must be accessible only to authorized IT staff. The building has a single main power feed. The team wants to ensure that the NOC remains operational during a power outage. Which combination of controls best meets the security and power requirements?

Install a biometric door lock with an audit log and a dedicated UPS for the NOC equipment.

Install a card reader for access and rely on the cafeteria's generator for power.

Use a standard key lock and connect the NOC equipment to the building's main power feed.

Use a keypad with a shared code and install a surge protector for the equipment.

A campus is building a new data center wing. The electrical design includes two independent utility feeds and a UPS system. The network team wants to ensure that a failure of one utility feed does not affect the other. What is the most important design consideration?

Connect both feeds to the same transformer to simplify the design.

Ensure the two utility feeds are physically separated and routed through different paths.

Use a single large UPS to support all equipment.

Install a generator that can power the entire wing.

A manufacturing campus is installing network equipment in a warehouse area. The space has high ambient temperature, dust, and no dedicated HVAC. The network team must install a switch that supports PoE for security cameras. Which approach best addresses the environmental constraints?

Install the switch in a sealed NEMA-rated cabinet without active cooling.

Use a switch without PoE and install separate power injectors for the cameras.

Mount the switch on an open rack and rely on the warehouse's general ventilation.

Place the switch in a ventilated enclosure with a filtered fan and install a dedicated air-conditioning unit for the enclosure.

A campus network installation is being designed with a requirement that network services remain available during a utility power outage. Which power solution is specifically designed to provide temporary power until generators start or until systems can be shut down gracefully?

Uninterruptible power supply (UPS)

CompTIACloudNetX

Domain 1Objective 5

Campus Installations CNX-001 Practice Questions (Page 3)

Part of the Network architecture design domain, which accounts for 31% of the CNX-001 exam. CompTIA does not publish an official question count, but from its 165-minute exam (~65–110 total, ~20–34 in this domain), expect 4–7 from this objective — we provide 20 practice questions to prepare you well beyond it. (estimate)

20questions here

4free pages

3concepts

31%of the exam

Questions 11–15

11application · medium
A campus is installing network equipment in a room that will also be used as a storage area for cleaning supplies. The room has limited airflow and no dedicated cooling. The network team is concerned about the equipment overheating and potential damage from fumes. What should the team do?
Select an answer first
12expert · hard
A campus is installing a new network operations center (NOC) in a building that also houses a public cafeteria. The NOC will contain sensitive equipment and must be accessible only to authorized IT staff. The building has a single main power feed. The team wants to ensure that the NOC remains operational during a power outage. Which combination of controls best meets the security and power requirements?
Select an answer first
13application · medium
A campus is building a new data center wing. The electrical design includes two independent utility feeds and a UPS system. The network team wants to ensure that a failure of one utility feed does not affect the other. What is the most important design consideration?
Select an answer first
14application · medium
A manufacturing campus is installing network equipment in a warehouse area. The space has high ambient temperature, dust, and no dedicated HVAC. The network team must install a switch that supports PoE for security cameras. Which approach best addresses the environmental constraints?
Select an answer first
15foundation · easy
A campus network installation is being designed with a requirement that network services remain available during a utility power outage. Which power solution is specifically designed to provide temporary power until generators start or until systems can be shut down gracefully?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CNX-001

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by CompTIA. “CNX-001” is a trademark of its owner, used for identification only.