When is L2 redirection mode typically used in WCCP?

When the cache engine is on a different subnet than the router

When GRE encapsulation is not supported by the router

When the cache engine is directly connected to the router on the same subnet

When the traffic must be encrypted

A company wants to redirect HTTP traffic from a branch router to a central WSA for web filtering. The WSA is located in the data center, and the branch router must send traffic over the WAN to reach it. The network team wants to avoid adding a new tunnel interface and prefers to use the existing routed infrastructure. Which WCCP configuration should be used on the branch router?

Configure WCCP with the HTTP service group and redirection using GRE encapsulation.

Configure WCCP with the HTTP service group and redirection using L2 redirection.

Configure WCCP with a dynamic service group and assign a custom port number.

Configure WCCP with the HTTP service group and set the redirect mode to 'load-balance'.

An organization has three WSAs in a service group. The router is configured to load-balance traffic among them. One of the WSAs goes offline. What will the router do?

Require manual intervention to remove the failed WSA.

Automatically remove the failed WSA from the service group and redistribute traffic to the remaining WSAs.

Stop redirecting traffic until the failed WSA comes back online.

Send all traffic to the first WSA in the list.

CCIE Security

Domain 5Objective 6

5.6 WCCP Redirection on Cisco Devices CCIE-SECURITY Practice Questions (Page 4)

Part of the 5.0 Advanced Threat Protection and Content Security domain, which accounts for 20% of the CCIE-SECURITY exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~10–16 in this domain), expect 1–2 from this objective — we provide 35 practice questions to prepare you well beyond it. (estimate)

35questions here

7free pages

9concepts

20%of the exam

Questions 16–20

16foundation · easy
Which WCCP redirection mode encapsulates redirected traffic in an IP tunnel?
Select an answer first
17foundation · easy
When is L2 redirection mode typically used in WCCP?
Select an answer first
18foundation · easy
Which command is used to enable WCCP on a Cisco router for a specific service group?
Select an answer first
19application · medium
A company wants to redirect HTTP traffic from a branch router to a central WSA for web filtering. The WSA is located in the data center, and the branch router must send traffic over the WAN to reach it. The network team wants to avoid adding a new tunnel interface and prefers to use the existing routed infrastructure. Which WCCP configuration should be used on the branch router?
Select an answer first
20application · medium
An organization has three WSAs in a service group. The router is configured to load-balance traffic among them. One of the WSAs goes offline. What will the router do?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CCIE-SECURITY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “CCIE-SECURITY” is a trademark of its owner, used for identification only.

5.6 WCCP Redirection on Cisco Devices CCIE-SECURITY Practice Questions (Page 4)

Questions 16–20

Which WCCP redirection mode encapsulates redirected traffic in an IP tunnel?

When is L2 redirection mode typically used in WCCP?

Which command is used to enable WCCP on a Cisco router for a specific service group?

An organization has three WSAs in a service group. The router is configured to load-balance traffic among them. One of the WSAs goes offline. What will the router do?

Keep studying — 5.0 Advanced Threat Protection and Content Security