What is the purpose of configuring an EtherChannel on a Cisco ASA or FTD?

To create a separate management plane for the device

To combine multiple physical interfaces into a single logical link for increased bandwidth and redundancy

To allow multiple devices to share the same IP address

To encrypt traffic between two sites

What is the purpose of assigning an IP address to an interface on a Cisco ASA or FTD?

To enable the interface to forward traffic and participate in routing

To provide a hostname for the device

To enable the interface to perform NAT only

To allow the interface to be used as a management interface only

What is the primary purpose of Network Address Translation (NAT) on a Cisco ASA or FTD?

To encrypt traffic between two sites

To translate private IP addresses to public IP addresses for internet connectivity

To provide redundancy for the firewall

To filter traffic based on application

What is Port Address Translation (PAT) on a Cisco ASA or FTD?

A method to translate public IP addresses to private IP addresses

A form of NAT that maps multiple private IP addresses to a single public IP address using different source ports

A technique to encrypt IP packets

A way to assign IP addresses dynamically to internal hosts

CCIE Security

Domain 1Objective 11

1.11 Network Connectivity Through Cisco ASA and Cisco FTD CCIE-SECURITY Practice Questions (Page 3)

Part of the 1.0 Perimeter Security and Intrusion Prevention domain, which accounts for 20% of the CCIE-SECURITY exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~10–16 in this domain), expect 1–1 from this objective — we provide 50 practice questions to prepare you well beyond it. (estimate)

50questions here

10free pages

8concepts

20%of the exam

Questions 11–15

11foundation · easy
What is the purpose of configuring an EtherChannel on a Cisco ASA or FTD?
Select an answer first
12foundation · easy
Which routing protocols can be configured on Cisco ASA and FTD for dynamic routing?
Select an answer first
13foundation · easy
What is the purpose of assigning an IP address to an interface on a Cisco ASA or FTD?
Select an answer first
14foundation · easy
What is the primary purpose of Network Address Translation (NAT) on a Cisco ASA or FTD?
Select an answer first
15foundation · easy
What is Port Address Translation (PAT) on a Cisco ASA or FTD?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CCIE-SECURITY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “CCIE-SECURITY” is a trademark of its owner, used for identification only.