In the end-to-end BYOD onboarding flow, which step typically occurs immediately after the device is discovered on the network?

The device is quarantined and denied all network access until an administrator manually approves it.

The device is immediately registered in the identity management system without any user interaction.

The device is authenticated using credentials or certificates to establish its identity.

The device is automatically granted full network access based on its MAC address.

Which of the following best describes how access control policies are applied to BYOD devices?

Policies are applied solely based on the device's MAC address.

Policies are static and identical for all BYOD devices.

Policies are applied based on a combination of user identity, device posture, and compliance status.

Policies are applied only after the device is manually approved by an administrator.

A user reports that their BYOD device cannot connect to the network. The device is not receiving an IP address. What is the most likely first step to diagnose the issue?

Reinstall the device's operating system.

Disable the device's firewall to allow network access.

Check if the device's MAC address is blocked on the network.

Verify that the device is in a VLAN that has DHCP services available.

During BYOD troubleshooting, you notice that the device is authenticated but is placed in a quarantine VLAN. What is the most likely reason?

The device is not authorized for network access.

The device's MAC address is not registered.

The device failed posture assessment due to missing antivirus or outdated OS.

The user entered incorrect credentials.

What is the primary purpose of the policy assignment step in the BYOD onboarding flow?

To collect the device's MAC address for future identification.

To determine the level of network access and security controls applied to the device.

To register the device with the MDM server for remote management.

To assign a static IP address to the device for network communication.

CCIE Security

Domain 4Objective 6

4.6 BYOD On-Boarding and Network Access Flows CCIE-SECURITY Practice Questions (Page 1)

Part of the 4.0 Identity Management, Information Exchange, and Access Control domain, which accounts for 25% of the CCIE-SECURITY exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~13–20 in this domain), expect 1–1 from this objective — we provide 48 practice questions to prepare you well beyond it. (estimate)

48questions here

10free pages

6concepts

25%of the exam

Questions 1–5

1foundation · easy
In the end-to-end BYOD onboarding flow, which step typically occurs immediately after the device is discovered on the network?
Select an answer first
2foundation · easy
Which of the following best describes how access control policies are applied to BYOD devices?
Select an answer first
3foundation · easy
A user reports that their BYOD device cannot connect to the network. The device is not receiving an IP address. What is the most likely first step to diagnose the issue?
Select an answer first
4foundation · easy
During BYOD troubleshooting, you notice that the device is authenticated but is placed in a quarantine VLAN. What is the most likely reason?
Select an answer first
5foundation · easy
What is the primary purpose of the policy assignment step in the BYOD onboarding flow?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CCIE-SECURITY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “CCIE-SECURITY” is a trademark of its owner, used for identification only.