Device Security on Cisco IOS XE CCIE-ENTERPRISE-INFRASTRUCTURE Practice Questions (Page 4)

Questions 16–20

1. 16foundation · easy

   Which command is used to apply a policy map to the control plane for CoPP?

   • Aclass-map <class-name>
   • Bservice-policy input <policy-name>
   • Cpolicy-map <policy-name>
   • Dcontrol-plane host
   Reveal Solution Discussion Select an answer first
2. 17foundation · easy

   What is the correct sequence of configuration steps for implementing CoPP?

   • AApply service policy, create class map, create policy map
   • BCreate class map, create policy map, apply service policy to control plane
   • CCreate policy map, create class map, apply service policy to control plane
   • DCreate access list, create policy map, create class map
   Reveal Solution Discussion Select an answer first
4. 18foundation · easy

   Which command displays the packet counts for each class in a CoPP policy?

   • Ashow class-map
   • Bshow policy-map control-plane
   • Cshow running-config
   • Dshow access-lists
   Reveal Solution Discussion Select an answer first
5. 19foundation · easy

   What does an increasing 'dropped' counter in 'show policy-map control-plane' indicate?

   • AThe control plane is dropping packets that exceed the configured police rate
   • BThe router is dropping packets because the CPU is overloaded
   • CThe router is dropping packets due to ACL deny statements
   • DThe router is dropping packets due to interface errors
   Reveal Solution Discussion Select an answer first
6. 20foundation · easy

   What does the 'A' in the AAA model stand for?

   • AAuditing
   • BAuthentication
   • CAccess
   • DApplication
   Reveal Solution Discussion Select an answer first