A law firm wants to provide secure wireless access for employee laptops and mobile devices. They require per-user authentication against Active Directory and want to ensure that each user's traffic is isolated on a separate VLAN based on their department. Which SSID configuration should the network administrator use?

WPA3-Personal with SAE and a single VLAN for all users

WPA2-Personal with a pre-shared key and a single VLAN for all users

Open SSID with a captive portal that asks for the user's Active Directory credentials

WPA2-Enterprise with 802.1X and RADIUS authentication, with VLAN assignment from the RADIUS server

A logistics company is deploying wireless in a large distribution center with high racks and narrow aisles. Forklift-mounted scanners need reliable coverage while moving through the aisles. The design team is considering MR access point models. Which AP model characteristic is most important for this environment?

A model with the highest possible number of spatial streams

A model with external antenna connectors to allow directional antennas for aisle coverage

A model with a built-in GPS receiver for location tracking

A model with a ruggedized enclosure for dust and temperature resistance

What is the primary purpose of a Meraki splash page in a guest wireless network?

To configure the guest's device with a static IP address

To enforce acceptable use policies and collect guest information

To provide a speed test for the guest's connection

To display the network's SSID and password

In a high-density wireless environment, which design principle is most directly intended to reduce co-channel interference among access points?

Implementing client balancing to distribute clients evenly across APs

Using a channel reuse plan with non-overlapping channels on adjacent APs

Increasing transmit power on all APs to improve signal coverage

Enabling band steering to push dual-band clients to 5 GHz

What is the primary goal of implementing bandwidth controls on a guest wireless network?

To increase the number of available SSIDs

To allow guests to access corporate resources

To improve the encryption strength of the guest network

To ensure fair resource allocation and prevent abuse

CiscoMeraki Solutions Specialist (ECMS)

Domain 2Objective 6

2.6 Design Enterprise Wireless Services 500-220 Practice Questions (Page 4)

Part of the Design domain, which accounts for 30% of the 500-220 exam. Cisco does not publish an official question count, but from its 90-minute exam (~35–60 total, ~11–18 in this domain), expect 2–3 from this objective — we provide 22 practice questions to prepare you well beyond it. (estimate)

22questions here

5free pages

8concepts

30%of the exam

8 Concepts in This Objective

High density wireless design principles
Capacity planning for high density deployments
MR access point selection and placement
Enterprise SSID configuration and security
Enterprise wireless roaming and QoS
Guest wireless network isolation and security
Guest access authentication and captive portal
Guest network bandwidth and usage controls

Questions 16–20

16application · medium
A law firm wants to provide secure wireless access for employee laptops and mobile devices. They require per-user authentication against Active Directory and want to ensure that each user's traffic is isolated on a separate VLAN based on their department. Which SSID configuration should the network administrator use?
Select an answer first
17application · medium
A logistics company is deploying wireless in a large distribution center with high racks and narrow aisles. Forklift-mounted scanners need reliable coverage while moving through the aisles. The design team is considering MR access point models. Which AP model characteristic is most important for this environment?
Select an answer first
18foundation · easy
What is the primary purpose of a Meraki splash page in a guest wireless network?
Select an answer first
19foundation · easy
In a high-density wireless environment, which design principle is most directly intended to reduce co-channel interference among access points?
Select an answer first
20foundation · easy
What is the primary goal of implementing bandwidth controls on a guest wireless network?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 500-220

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “500-220” is a trademark of its owner, used for identification only.

2.6 Design Enterprise Wireless Services 500-220 Practice Questions (Page 4)

Questions 16–20

What is the primary purpose of a Meraki splash page in a guest wireless network?

In a high-density wireless environment, which design principle is most directly intended to reduce co-channel interference among access points?

What is the primary goal of implementing bandwidth controls on a guest wireless network?

Keep studying — Design