An organization is using Cisco Intersight to monitor a large fleet of UCS servers. The operations team wants to automate the response to common hardware alerts, such as automatically opening a support case with Cisco TAC when a disk fails. What Intersight feature should the team use?

Intersight's 'Maintenance' feature, which can be scheduled for hardware replacement.

Intersight's 'Inventory' feature, which tracks hardware components.

Intersight's 'Alarm' feature, which can be configured to send emails.

Intersight's 'Workflow' feature, which can be triggered by alerts to perform actions.

A company is evaluating Cisco Intersight for its data center. The company's security policy requires that all management traffic be encrypted and that the management platform be accessible from anywhere. Which feature of Intersight addresses both of these requirements?

Intersight's use of Telnet for device communication.

Intersight's ability to be deployed as a virtual appliance on-premises.

Intersight's support for SNMP v3 for all monitoring.

Intersight's cloud-based architecture with secure outbound connections from managed devices.

A data center team wants to use Cisco Intersight to monitor its Nexus 9000 switches. The switches are currently managed independently. What is the first step the team must take to integrate the Nexus switches with Intersight?

Deploy a virtual appliance in the data center to proxy the connection.

Create a new Intersight account and claim the switches by serial number.

Install the Intersight Device Connector on each Nexus switch.

Configure SNMP v3 on the Nexus switches.

A network engineer is configuring SPAN on a Nexus switch to monitor traffic for a compliance requirement. The engineer must capture all traffic from a specific server (port Ethernet1/10) and ensure no packets are lost. The monitoring appliance is connected to port Ethernet1/20, which is a 10 Gbps port. The server's traffic averages 9 Gbps with occasional bursts to 11 Gbps. What should the engineer do to ensure no packet loss?

Configure the SPAN session to monitor only ingress traffic.

Enable 'spanning-tree portfast' on the destination port.

Use a different destination port with a higher bandwidth, such as a 40 Gbps port.

Configure the SPAN session with the 'drop-on-overflow' option.

Which best practice should be followed when deploying SPAN in a data center?

Use the same destination port for multiple SPAN sessions

Monitor only the traffic that is necessary for analysis

Enable SPAN on all ports to ensure complete visibility

Configure SPAN to block traffic on the source ports

CiscoCertified Network Professional Data Center

Domain 2Objective 6

2.6 Implement Infrastructure Monitoring Such as SPAN and Cisco Intersight 350-601 Practice Questions (Page 3)

Part of the Compute domain, which accounts for 25% of the 350-601 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~13–20 in this domain), expect 2–3 from this objective — we provide 25 practice questions to prepare you well beyond it. (estimate)

25questions here

5free pages

6concepts

25%of the exam

Questions 11–15

11expert · hard
An organization is using Cisco Intersight to monitor a large fleet of UCS servers. The operations team wants to automate the response to common hardware alerts, such as automatically opening a support case with Cisco TAC when a disk fails. What Intersight feature should the team use?
Select an answer first
12application · medium
A company is evaluating Cisco Intersight for its data center. The company's security policy requires that all management traffic be encrypted and that the management platform be accessible from anywhere. Which feature of Intersight addresses both of these requirements?
Select an answer first
13application · medium
A data center team wants to use Cisco Intersight to monitor its Nexus 9000 switches. The switches are currently managed independently. What is the first step the team must take to integrate the Nexus switches with Intersight?
Select an answer first
14expert · hard
A network engineer is configuring SPAN on a Nexus switch to monitor traffic for a compliance requirement. The engineer must capture all traffic from a specific server (port Ethernet1/10) and ensure no packets are lost. The monitoring appliance is connected to port Ethernet1/20, which is a 10 Gbps port. The server's traffic averages 9 Gbps with occasional bursts to 11 Gbps. What should the engineer do to ensure no packet loss?
Select an answer first
15foundation · easy
Which best practice should be followed when deploying SPAN in a data center?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 350-601

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-601” is a trademark of its owner, used for identification only.