A network engineer notices that a switch port connected to a server has been placed in the err-disabled state. The port security configuration on this port has a maximum MAC address count of 5, violation mode of shutdown, and sticky learning enabled. The engineer checks the logs and sees that the port was disabled because a violation occurred. What is the most likely cause of this violation?

A new device with a different MAC address was connected to the port, exceeding the maximum allowed MAC addresses.

The switch was rebooted, and the sticky MAC addresses were lost, causing the port to re-learn them.

The port was manually configured with a static MAC address that does not match the server's current MAC address.

The server's NIC was replaced, and the new MAC address was automatically learned as a sticky address.

In the fabric binding configuration on MDS, what is the purpose of the 'database' command?

To enter the mode where authorized switch WWNs are added

To enable fabric binding on a specific interface

To display the current fabric binding status

To delete the fabric binding configuration

What is the primary purpose of port security on a switch port?

To prioritize traffic based on QoS policies

To provide redundancy in case of link failure

To restrict access to the port based on the MAC addresses of connected devices

To encrypt all traffic passing through the port

CiscoCertified Network Professional Data Center

Domain 5Objective 3

5.3 Apply Storage Security 350-601 Practice Questions (Page 2)

Part of the Security domain, which accounts for 15% of the 350-601 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~8–12 in this domain), expect 3–4 from this objective — we provide 25 practice questions to prepare you well beyond it. (estimate)

25questions here

5free pages

10concepts

15%of the exam

Questions 6–10

6foundation · easy
Which AAA component is responsible for determining whether an authenticated storage administrator is allowed to execute a specific configuration command?
Select an answer first
7application · medium
A network engineer notices that a switch port connected to a server has been placed in the err-disabled state. The port security configuration on this port has a maximum MAC address count of 5, violation mode of shutdown, and sticky learning enabled. The engineer checks the logs and sees that the port was disabled because a violation occurred. What is the most likely cause of this violation?
Select an answer first
8foundation · easy
In the fabric binding configuration on MDS, what is the purpose of the 'database' command?
Select an answer first
9foundation · easy
What is the primary purpose of port security on a switch port?
Select an answer first
10foundation · easy
Which identifier is used in fabric binding to identify authorized switches?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 350-601

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-601” is a trademark of its owner, used for identification only.

5.3 Apply Storage Security 350-601 Practice Questions (Page 2)

Questions 6–10

Which AAA component is responsible for determining whether an authenticated storage administrator is allowed to execute a specific configuration command?

In the fabric binding configuration on MDS, what is the purpose of the 'database' command?

What is the primary purpose of port security on a switch port?

Which identifier is used in fabric binding to identify authorized switches?

Keep studying — Security