1.4 Apply ACI Concepts 350-601 Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   In ACI VMM policy management, what is the purpose of a port group policy?

   • ATo manage the APIC cluster's backup and restore operations
   • BTo define the routing protocol used between leaf switches and the spine
   • CTo define the VLAN and network settings for virtual machine port groups on the vSwitch
   • DTo configure the physical interface speed and duplex on the leaf switches
   Reveal Solution Discussion Select an answer first
2. 7expert · hard

   An engineer is configuring access policies for a new leaf switch. The switch has 48 ports, and the engineer wants to apply a specific policy group to ports 1-24 and another to ports 25-48. The engineer creates two interface policy groups and tries to apply them to the respective port ranges. However, the APIC does not allow applying the policy groups to the port ranges. What is the likely reason?

   • AThe port ranges overlap with the fabric ports.
   • BThe interface policy groups have conflicting MTU settings.
   • CThe interface policy groups are not associated with a switch policy.
   • DThe engineer is trying to apply the policy groups to a range that spans multiple line cards.
   Reveal Solution Discussion Select an answer first
4. 8application · medium

   A server team is connecting bare-metal servers to an ACI leaf switch. Each server requires a specific VLAN for its traffic. The engineer wants to associate the physical interfaces with the correct VLAN and also enable LLDP for monitoring. What should the engineer configure?

   • ACreate a VMM domain and associate it with the physical interfaces.
   • BConfigure the VLAN directly on the leaf switch's physical interface using the CLI.
   • CUse a fabric policy to define the VLAN and LLDP for all interfaces.
   • DCreate an interface policy group that includes the VLAN and LLDP settings, then apply it to the server-facing interfaces.
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   Which ACI access policy is used to configure switch-level settings such as SNMP, syslog, and NTP on leaf and spine switches?

   • AInterface policy
   • BAccess policy
   • CSwitch policy
   • DGlobal policy
   Reveal Solution Discussion Select an answer first
6. 10foundation · easy

   When provisioning a new leaf switch into an existing ACI fabric, which of the following must be assigned to the switch to uniquely identify it in the fabric?

   • AA VLAN pool and an EPG for the access ports
   • BA node ID and a role (leaf or spine)
   • CAn IP address and a subnet mask for the management interface
   • DA VMM domain and a vCenter credential
   Reveal Solution Discussion Select an answer first