What is the purpose of authentication in Secure ZTP?

To prevent the device from being rebooted during ZTP

To ensure the device is communicating with a trusted provisioning server

To encrypt the configuration file so only the device can read it

To speed up the configuration download process

What is the purpose of secure boot in the ZTP process?

To ensure the device boots only trusted software

To encrypt the configuration file during boot

To allow the device to boot without any configuration

After a ZTP device obtains the location of the configuration file, what does it do next?

It downloads the configuration file and applies it to the running configuration

It sends a copy of the configuration to the provisioning server for validation

It reboots to ensure the configuration is loaded from NVRAM

It waits for manual approval from an administrator

A router fails Secure ZTP with an error indicating that the config file could not be found on the provisioning server. The DHCP options are correct, and the router can reach the server. What is the MOST likely cause?

The provisioning server is using a different protocol than the router expects.

The config filename in the DHCP option 67 does not match the filename on the server.

The router's clock is incorrect, causing the config download to fail.

The router's certificate is not trusted by the provisioning server.

CiscoCertified Network Professional Service Provider

Domain 5Objective 6

5.6 Describe Secure ZTP 350-501 Practice Questions (Page 2)

Part of the Automation and Assurance domain, which accounts for 15% of the 350-501 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~8–12 in this domain), expect 1–1 from this objective — we provide 25 practice questions to prepare you well beyond it. (estimate)

25questions here

5free pages

8concepts

15%of the exam

Questions 6–10

6foundation · easy
What is the purpose of authentication in Secure ZTP?
Select an answer first
7foundation · easy
In DHCP-based ZTP, which DHCP option is commonly used to provide the device with the URL or IP address of the provisioning server?
Select an answer first
8foundation · easy
What is the purpose of secure boot in the ZTP process?
Select an answer first
9foundation · easy
After a ZTP device obtains the location of the configuration file, what does it do next?
Select an answer first
10application · medium
A router fails Secure ZTP with an error indicating that the config file could not be found on the provisioning server. The DHCP options are correct, and the router can reach the server. What is the MOST likely cause?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 350-501

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-501” is a trademark of its owner, used for identification only.