A service provider is configuring a new VRF for a customer. The customer has two sites that need to communicate, and the provider wants to ensure that the routes are unique in the BGP table. The provider also wants to ensure that the routes are only shared between the two sites. Which two configuration elements must be correctly set on the PE routers?

Route distinguisher and MPLS label

Route distinguisher and BGP next-hop

Route distinguisher and route target

What is the purpose of a shared services VPN in an L3VPN architecture?

To isolate customer traffic from each other

To replace the need for MPLS labels

To provide a backup path for the provider backbone

To provide common services such as Internet or centralized applications to multiple VPN customers

A network engineer is troubleshooting an MPLS L3VPN issue where a customer's CE router at site A can ping the PE router but cannot reach the CE router at site B. The engineer checks the BGP VPNv4 table on the PE router at site A and sees the route to site B's CE. What should the engineer check next to isolate the problem?

The route target configuration on the PE router at site B.

The routing table of the CE router at site B.

The BGP session between the PE routers.

The MPLS forwarding table on the PE router at site A for the VPN label.

CiscoCertified Network Professional Service Provider

Domain 4Objective 3

4.3 Configure L3VPN 350-501 Practice Questions (Page 3)

Part of the Services domain, which accounts for 20% of the 350-501 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~10–16 in this domain), expect 2–3 from this objective — we provide 26 practice questions to prepare you well beyond it. (estimate)

26questions here

6free pages

10concepts

20%of the exam

Questions 11–15

11application · medium
A service provider is configuring a new VRF for a customer. The customer has two sites that need to communicate, and the provider wants to ensure that the routes are unique in the BGP table. The provider also wants to ensure that the routes are only shared between the two sites. Which two configuration elements must be correctly set on the PE routers?
Select an answer first
12foundation · easy
Which Internet access option for L3VPN customers uses a dedicated VRF that is separate from the customer's VPN VRF?
Select an answer first
13foundation · easy
What is the purpose of a shared services VPN in an L3VPN architecture?
Select an answer first
14application · medium
A network engineer is troubleshooting an MPLS L3VPN issue where a customer's CE router at site A can ping the PE router but cannot reach the CE router at site B. The engineer checks the BGP VPNv4 table on the PE router at site A and sees the route to site B's CE. What should the engineer check next to isolate the problem?
Select an answer first
15foundation · easy
Which PE-CE routing option requires the least configuration and is often used for simple, single-homed customer connections?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 350-501

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-501” is a trademark of its owner, used for identification only.

4.3 Configure L3VPN 350-501 Practice Questions (Page 3)

Questions 11–15

Which Internet access option for L3VPN customers uses a dedicated VRF that is separate from the customer's VPN VRF?

What is the purpose of a shared services VPN in an L3VPN architecture?

Which PE-CE routing option requires the least configuration and is often used for simple, single-homed customer connections?

Keep studying — Services