A service provider uses SNMPv3 to send notifications from a core router to a collector. The collector is temporarily unreachable, and the engineer wants to ensure that no critical notification is lost during the outage. Which configuration should be used?

Configure multiple community strings

Increase the SNMP timeout value

Configure SNMP informs to the collector

Configure SNMP traps to the collector

What is the purpose of an SNMPv3 view?

To restrict the source IP addresses of SNMP requests.

To define which MIB objects a group can access.

To specify the authentication protocol for a user.

To define the trap receiver for the device.

A junior engineer is learning about SNMP and asks why SNMPv3 is preferred over SNMPv2c in a service provider network. Which answer is correct?

SNMPv3 uses community strings for security

SNMPv3 supports more MIBs than SNMPv2c

SNMPv3 provides authentication and encryption, while SNMPv2c uses only community strings

CiscoCertified Network Professional Service Provider

Domain 5Objective 10

5.10 Configure and Verify SNMP (v2c/v3) 350-501 Practice Questions (Page 2)

Part of the Automation and Assurance domain, which accounts for 15% of the 350-501 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~8–12 in this domain), expect 1–1 from this objective — we provide 22 practice questions to prepare you well beyond it. (estimate)

22questions here

5free pages

8concepts

15%of the exam

Questions 6–10

6application · medium
A service provider uses SNMPv3 to send notifications from a core router to a collector. The collector is temporarily unreachable, and the engineer wants to ensure that no critical notification is lost during the outage. Which configuration should be used?
Select an answer first
7foundation · easy
What is the purpose of an SNMPv3 view?
Select an answer first
8foundation · easy
Which command displays the SNMPv3 users configured on a Cisco IOS XE device?
Select an answer first
9application · medium
A junior engineer is learning about SNMP and asks why SNMPv3 is preferred over SNMPv2c in a service provider network. Which answer is correct?
Select an answer first
10application · medium
A network engineer is configuring SNMPv3 on an IOS XR router. The security policy requires that all SNMP traffic be encrypted. Which SNMPv3 security level must be configured for the user?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 350-501

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-501” is a trademark of its owner, used for identification only.

5.10 Configure and Verify SNMP (v2c/v3) 350-501 Practice Questions (Page 2)

Questions 6–10

A service provider uses SNMPv3 to send notifications from a core router to a collector. The collector is temporarily unreachable, and the engineer wants to ensure that no critical notification is lost during the outage. Which configuration should be used?

What is the purpose of an SNMPv3 view?

Which command displays the SNMPv3 users configured on a Cisco IOS XE device?

A junior engineer is learning about SNMP and asks why SNMPv3 is preferred over SNMPv2c in a service provider network. Which answer is correct?

A network engineer is configuring SNMPv3 on an IOS XR router. The security policy requires that all SNMP traffic be encrypted. Which SNMPv3 security level must be configured for the user?

Keep studying — Automation and Assurance