CiscoCertified Support Technician (CCST) Networking
Domain 2Objective 3
2.3. Identify IPv6 Addresses and Prefix Formats. 100-150 Practice Questions (Page 1)
Part of the Addressing and Subnet Formats domain, which makes up ~11% of our current practice bank. Cisco does not publish an official question count, but from its 50-minute exam (~20–35 total, ~2–4 in this domain), expect 1–1 from this objective — we provide 25 practice questions to prepare you well beyond it. (estimate)
25questions here
5free pages
3concepts
Questions 1–5
- 1
A network administrator is configuring a new device and needs to assign it an address that is only valid within the local link and will not be routed. Which IPv6 address should be used?
Select an answer first - 2
A technician is examining a packet capture and sees the destination address ff02::1:ff00:1234. What type of address is this?
Select an answer first - 3
A network engineer is reviewing a configuration file and sees the address 2001:db8:0:1::1/64. How many bits are used for the network portion?
Select an answer first - 4
A network engineer is summarizing a block of IPv6 addresses for a routing table. The addresses range from 2001:db8:abcd:0000::/64 to 2001:db8:abcd:ffff::/64. What is the most specific prefix that summarizes this entire range?
Select an answer first - 5
A network engineer is planning the addressing scheme for a new office. The ISP has assigned the prefix 2001:db8:abcd::/48. The engineer needs to create 256 subnets. What prefix length should be used for each subnet?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “100-150” is a trademark of its owner, used for identification only.